Where is the meme?

disconnects power cord

I will just do the update first /s

Isnt it unmaintaned?

Agreed. Software center tend to hang and or refresh the ui unnecesarilly often.

Well, if they would not nerf it maybe it woyld not go so much down

curl cheat.sh/command is more useful because it just spits out common examples. man is only useful if you need complete documentation or need to build a complex oneliner.

I never remember hot to extract tar files. Would you dive into the documentation for that or look up a cheatsheet?

It should be possible. I’ve just recently created a virtual hard disk in virtual box and mapped it to a physical ssd and installed windows on it. just change the settings of the virtual machine to match the target hardware and it should be fine I think.

Got excited until I saw Bethesda

more photos of the components would be great. maybe even get shell access 😈?

That is a classical windows mentality. “gnome is cheap macos clone”. Gnome tries just to create a minimal and distraction free and polished DE. KDE tries to bulldose as many features as possible and that sacrifices stability and UX. Analogy would be similar to having a leaky water pipe in the roof. Gnome would fix the leaking pipe meanwhile KDE would give you a bucket and a few towels to clean that up in different ways.

“Installing APP does not require you to switch to it nor asking friends and family to use it. What it does is allowing them to reach out to you in a private way. By installing it you respect and support their choice of avoiding BAD_APP.”

On the sidenote: Just recommend Signal. It uses phone number as identifier, easy to grow by using phone book, has good track record when glowies have a warrant and most importantly it’s stable. It has flaws (no sms, not saving chat history) but there are no other alternatives available yet that beat signal for normies.

Just using duckduckgo. I’m not happy with my search results as they heavily prioritize clickbait CEO blogs instead of showing official documentation / sources.

It’s a KINGSTON SA2000M81000G. Here is a “datasheet”.

I’ve looked up some of the inode numbers in the logs and they point to some application state data in /var so reinstalling application could bring those files back.

I’ve never touched SMART before since I’ve assumed it’s an HDD thing. Anyway. I’ve installed smartmontools. nvme ssds don’t report smart stats like for hdds so this answer suggested looking for Percentage used in stead.

root@archiso ~ # smartctl -a --test=long /dev/nvme0n1 | grep "Used"
Percentage Used:                    2%

It could be true that the firmware is not optimal but I could not find any news about that like you have for the 980. gnome software should keep firmware up to date in the background but just for good measure I ran it in live environment as well. I will probably get a new ssd at some point in the future and maybe use this old one for non critical storage in the future.

Well I never set up any raid on my systems

root@archiso /mnt/arch # btrfs device usage .
/dev/nvme0n1p2, ID: 1
   Device size:           931.01GiB
   Device slack:              0.00B
   Data,single:           520.01GiB
   Metadata,DUP:            6.00GiB
   System,DUP:             16.00MiB
   Unallocated:           404.99GiB

root@archiso /mnt/arch # btrfs fi us .
Overall:
    Device size:		 931.01GiB
    Device allocated:		 526.02GiB
    Device unallocated:		 404.99GiB
    Device missing:		     0.00B
    Device slack:		     0.00B
    Used:			 480.21GiB
    Free (estimated):		 447.51GiB	(min: 245.02GiB)
    Free (statfs, df):		 447.51GiB
    Data ratio:			      1.00
    Metadata ratio:		      2.00
    Global reserve:		 512.00MiB	(used: 0.00B)
    Multiple profiles:		        no

Data,single: Size:520.01GiB, Used:477.49GiB (91.82%)
   /dev/nvme0n1p2	 520.01GiB

Metadata,DUP: Size:3.00GiB, Used:1.36GiB (45.45%)
   /dev/nvme0n1p2	   6.00GiB

System,DUP: Size:8.00MiB, Used:80.00KiB (0.98%)
   /dev/nvme0n1p2	  16.00MiB

Unallocated:
   /dev/nvme0n1p2	 404.99GiB

root@archiso /mnt/arch # btrfs device stats .
[/dev/nvme0n1p2].write_io_errs    0
[/dev/nvme0n1p2].read_io_errs     0
[/dev/nvme0n1p2].flush_io_errs    0
[/dev/nvme0n1p2].corruption_errs  19317
[/dev/nvme0n1p2].generation_errs  0

yes I’m sure.

root@archiso /mnt/arch # cat ./etc/fstab 
# Static information about the filesystems.
# See fstab(5) for details.

#      
# /dev/nvme0n1p2
UUID=145c0d63-05f8-43a2-934b-7583cb5f6100	/         	btrfs     	rw,relatime,ssd,discard=async,space_cache=v2,subvolid=256,subvol=/@	0 0

# /dev/nvme0n1p2
UUID=145c0d63-05f8-43a2-934b-7583cb5f6100	/.snapshots	btrfs     	rw,relatime,ssd,discard=async,space_cache=v2,subvolid=260,subvol=/@.snapshots	0 0

# /dev/nvme0n1p1
UUID=4BF3-12AA      	/boot     	vfat      	rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,utf8,errors=remount-ro	0 2

# /dev/nvme0n1p2
UUID=145c0d63-05f8-43a2-934b-7583cb5f6100	/home     	btrfs     	rw,relatime,ssd,discard=async,space_cache=v2,subvolid=257,subvol=/@home	0 0

# /dev/nvme0n1p2
UUID=145c0d63-05f8-43a2-934b-7583cb5f6100	/var/cache/pacman/pkg	btrfs     	rw,relatime,ssd,discard=async,space_cache=v2,subvolid=259,subvol=/@pkg	0 0

# /dev/nvme0n1p2
UUID=145c0d63-05f8-43a2-934b-7583cb5f6100	/var/log  	btrfs     	rw,relatime,ssd,discard=async,space_cache=v2,subvolid=258,subvol=/@log	0 0

root@archiso ~ # lsblk
NAME        MAJ:MIN RM   SIZE RO TYPE MOUNTPOINTS
loop0         7:0    0   673M  1 loop /run/archiso/airootfs
sda           8:0    0 476.9G  0 disk 
└─sda1        8:1    0 476.9G  0 part 
sdb           8:16   0 119.2G  0 disk 
└─sdb1        8:17   0 119.2G  0 part 
sdc           8:32   1  14.4G  0 disk 
├─sdc1        8:33   1   778M  0 part 
└─sdc2        8:34   1    15M  0 part 
nvme0n1     259:0    0 931.5G  0 disk 
├─nvme0n1p1 259:1    0   511M  0 part 
└─nvme0n1p2 259:2    0   931G  0 part 
root@archiso ~ # btrfs check /dev/nvme0n1p2
Opening filesystem to check...
Checking filesystem on /dev/nvme0n1p2
UUID: 145c0d63-05f8-43a2-934b-7583cb5f6100
[1/7] checking root items
[2/7] checking extents
[3/7] checking free space tree
[4/7] checking fs roots
[5/7] checking only csums items (without verifying data)
[6/7] checking root refs
[7/7] checking quota groups skipped (not enabled on this FS)
found 514161029120 bytes used, no error found
total csum bytes: 496182240
total tree bytes: 1464221696
total fs tree bytes: 813809664
total extent tree bytes: 57655296
btree space waste bytes: 248053148
file data blocks allocated: 4385471590400
 referenced 512920408064
btrfs check /dev/nvme0n1p2  4.15s user 1.66s system 62% cpu 9.316 total

RAID? how can I check? I’m not using RAID as far as I know

Luke and Alex