Americas enemy

So… Greenland?

No one answered so I will:

Have an enclosed printer! You won’t be able to print anything larger than a couple of cm otherwise. Also make sure to not have air gaps, any cold air getting in can potentially lift up a corner.

You need a good first layer, even more so than with PLA. Have it squish a little more so that it sticks to the build plate like crazy.

Preheat your chamber passively with the bed. With my enclosed Ender 3 I did 10 minutes before large prints.

High bed temps: you might get away with 90°C at the lowest but 100°C is recommended.

When a print starts to lift off the build plate there’s no fixing it. Either you’re fine with the warp (and some squished layers/deformation) or you have to restart the print. No way to sugar-coat this.

Turn down part cooling as much as your overhangs allow, though with a hot enough chamber you might get away with “a lot” of cooling.

Print with brim or adhesion tabs! Mind the geometry of your part: models with tall walls will tend to warp more.

Tl;dr: printing ABS can be cruel, but it rewards you with strong, light parts that stay in shape even at high ambient temps like a car interior.

If you buy a Voron you need to be aware that everything the printer does it does because of YOU!

Any problems that arise will be due to misconfiguration, bad assembly, no proper tuning… But when you get it to print amazing results that is YOUR accomplishment.

Yeah, I absolutely agree!

The only thing that one has to give Bambulab credit for is making 3D printing accessible to people who don’t want to or don’t have the skills to tinker with their printer.

And on any month of the year! Because queer people and our liberal way of life are not exclusively under threat in June.

General limit yes, but make it 150 for now. It’s easier to get people on board with a higher limit and lowering the limit will also encounter less resistance down the road (haha).

Command-detonated directional anti-personnel mine “M18 Claymore”.

It can also be used as a booby-trap, but that is prohibited by the Ottowa Treaty.

Suburbia is only reliant on cars because it was buitl that way. FuckCars wants that to change. The movement is not just condemning cars, but car centric infrastructure first and foremost.

I know this is a joke… But just in case:

You know that you can turn off automatic updates, right?

They voted again, he is chancellor now

It will be turned into a giant lake once they are done mining. You burn a lot of volume and filling it wil soil again is just not possible

I would do this, if I ever cooked spaghetti. I hate long noodles and will cut them up every time.

For now, most of the ad bullshit can be turned off. Though it turned back on after the latest software update and forced me to spend another 10 minutes digging through the horrendous settings menu.

What is broken about copper? Bit ootl.

Okay, I’m seeing a lot of “alternatives” posted. But to all of you recommending minimal launchers: They are NOT an alternative for Nova.

I’ve used Nova for near on 10 years now, always trying other launchers for a while. In those 10 years I realized that I want a fully fledged “traditional” launcher, not a list-based one where I have to search for my apps.