• 4 Posts
  • 9 Comments
Joined 3 months ago
cake
Cake day: March 18th, 2025

help-circle




  • Thank you for your input. That does sound reasonable, currently i am closing and opening for each pixel i am setting. However the example code mine is based on also implemented away to set the cursor on an area. And i can then probably just provide more bytes than just two here. I will try this out later!

    I don’t think mine is AVR based. It is the architecture of the CPU right? The datasheet says it has two Harvard Architecture Xtensa LX7 CPUs


  • Thank you for your reply. Sorry for forgetting the most important part about my setup. The Controller i am using, it is a NORA-W106 on a Arduino Nano ESP32 and according to its docs it has a clock speed of up to 240MHz, so i guess that would be enough depending on if that’s also base clock speed its running on right now…

    NORA-W10 series modules have a dual-core system with two Harvard Architecture Xtensa LX7 CPUs operating at a maximum 240 MHz internal clock frequency.

    Currently i set the SPI speed using SPI.setClockDivider(SPI_CLOCK_DIV2); Which would be 120MHz to my understanding assuming it runs at maximum speed. Too fast for SPI but that is not how it feels like. I will try some things out once i am back home especially as the method i use seems to be deprecated.








  • Bjarne@feddit.orgtoFuck Cars@lemmy.worldNo words
    link
    fedilink
    English
    arrow-up
    20
    ·
    edit-2
    10 days ago

    I mean these are also two different types of cars. But it is actually so weird to see even two cars of the same type made in different times next to each other. It’s like somebody messed with the scale slider in the level editor. It’s uncanny.